N8000-1500

NetMax 1500 MIPS Digital Matrix Controller

  • N8000-1500
The N8000-1500 represents that state of the art for pro audio signal processing. At the heart of the N8000-1500 is the new DSP-2 engine.  Composed of three dual-core processors, the DSP-2 expands the total processing power of the N8000-1500 to 1500 MIPS. The N8000-1500 matrix can be configured IN THE FIELD to one of six matrix layouts. The N8000-1500 can be configured and controlled with IRIS-Net.

Analog Inputs Modular
Analog Outputs Modular
Audio Network CobraNet CM-1 Module (optional)
Cooling Left-to-right, 3-stage fan
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
Digital Inputs Modular
Digital Outputs Modular
FIR-Drive Yes
GPIO Control Port 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control) 3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact)3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing 2 DSPs Standard (150 MHz, 300 MIPS), DSP-2 Extension Module (3 dual core processors-1200 MIPS total) , 1 DSP per Audio Module (100 MHz, 100 MIPS) 1500 MIPS total without I/O cards
Network Control (IRIS-Net) Yes
Network Interface Ethernet-10/100 MBit/s, RJ-45
Power Consumption 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply 100 - 240 VAC, 50/60 Hz
Sample Rate 48 kHz internal
Serial Interface 2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted) 115 dB
Total Harmonic Distortion 0.01 %
Height 2RU 88.1 mm (3.47")
Width 483 mm (19.02")
Depth 381 mm (15")
Weight Net 7.37 kg (16.25 lbs)