N8000

NetMax 300 MIPS Digital Matrix Controller

  • N8000
The EV NetMax N8000 is an extremely flexible audio control processor for a wide range of applications. Presented in a compact 2RU configuration, the N8000 can be configured a number of ways to fit the need at hand. The N8000 matrix can be configured IN THE FIELD to one of six matrix layouts. The N8000 can be configured and controlled with IRIS-Net. In addition, the N8000 can talk through its integrated CAN bus with any compatible IRIS-Net hardware, such as the Electro-Voice remote control amplifier series.

Audio Network CobraNet CM-1 Module (optional)
CAN Bus Interface 2 x RJ-45
Cooling Left-to-right, 3-stage fan
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing
FIR-Drive Yes
GPIO Control Port 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control)3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact) 3 Reference Outputs (+5 V / +10 V/ GND)
Internal Processing 2 DSPs Standard (150 MHz, 300 MIPS)1 DSP per Audio Module (100 MHz, 100 MIPS)DSP-1 Extension Module optional (+300 MIPS)
Network Control (IRIS-Net) Yes
Network Interface Ethernet-10/100 MBit/s, RJ-45
Power Consumption 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules)
Power Supply 100 - 240 VAC, 50/60 Hz
Sample Rate 48 kHz internal
Serial Interface 2 Ports, 9pin D-Sub female (Remote Control)
Signal-to-Noise Ratio (A-weighted) 115 dB
Total Harmonic Distortion 0.01 %
Height 2RU 88.1 mm (3.47")
Width 483 mm (19.02")
Depth 381 mm (15")
Weight Net 7.37 kg (16.25 lbs)